East Sussex · BN1, BN2, BN3
Cylinder & Pump (G3) in Brighton and Hove
Cylinder, pump and unvented hot water system work covers installing or replacing a hot water storage cylinder, fitting a pump to boost pressure to showers or taps, and — where the system is unvented, meaning it's fed directly from the mains rather than a header tank — carrying out the installation and any subsequent work under G3 unvented hot water qualification, which is a legal requirement under the Building Regulations.
In Brighton and Hove, that covers Kemp Town, Hove, Preston Park, Hanover, Seven Dials, Fiveways, Patcham, Portslade. Brighton and Hove is known for its Regency architecture, extensive Victorian terraced housing, and later 20th-century development, all within a compact coastal city where many properties are in conservation areas and a significant number are listed.
Coverage
Areas we cover in Brighton and Hove for cylinder & pump (g3)
Property styles in Brighton and Hove
Regency squares and terraces are concentrated around Brunswick, Kemp Town and the seafront, with dense Victorian terraced housing across much of the wider city, and later suburban housing further from the centre. Basement conversions, loft conversions and rear extensions are common project types on the terraced stock, subject to conservation area and party wall considerations.
Planning considerations
Brighton & Hove City Council is the local planning authority. The city has one of the highest concentrations of conservation areas of any local authority in the South East, and many properties are listed, particularly in the Regency squares. Basement work also requires careful consideration of structural and drainage issues in a dense urban setting.
How it works
Our cylinder & pump (g3) process
- 01
Assessment
Reviewing the existing hot water system, incoming mains pressure and flow rate, and what the household needs from it.
- 02
Specification
Agreeing cylinder size and type, and whether a pump is needed to meet pressure requirements.
- 03
Installation
Fitting the new cylinder or pump, including the safety fittings a G3 installation requires — expansion vessel, pressure and temperature relief valves, and tundish.
- 04
Commissioning and certification
Testing the system and issuing the relevant Building Regulations notification and commissioning certificate for unvented installations.
Also in this area
Other services we provide in Brighton and Hove
Nearby coverage
Cylinder & Pump (G3) in nearby areas
Need help right now?
Before booking a site visit, get an instant answer for £4.99 — Ask an Expert in Brighton and Hove.
FAQs
Cylinder & Pump (G3) in Brighton and Hove: FAQs
Do you provide cylinder & pump (g3) across all of Brighton and Hove?
Yes, we cover the BN1, BN2 and BN3 postcode areas in full, including Kemp Town, Hove, Preston Park, Hanover, Seven Dials, Fiveways, Patcham, Portslade.
What does G3 qualified mean and why does it matter?
G3 is the recognised qualification for working on unvented hot water systems, required under Building Regulations Part G because these systems store pressurised hot water and can fail dangerously if the safety devices aren't correctly installed or maintained. Always check an engineer's G3 qualification before unvented cylinder work is carried out.
Does an unvented cylinder need annual servicing?
Yes, and it's usually a condition of the manufacturer's warranty as well as good practice — the safety valves need checking annually by a G3-qualified engineer to confirm they're operating correctly.
Can I extend a listed Regency property in Brighton?
Alterations to listed buildings require listed building consent in addition to any planning permission, and the historic character of Regency terraces means proposals are considered carefully. We assess feasibility on a case-by-case basis.
Get a quote for cylinder & pump (g3) in Brighton and Hove
Tell us about the property and what you have in mind, and we'll arrange a site visit.
Last reviewed 2026-07-28.