East Sussex · BN1, BN2, BN3
Screeding in Brighton and Hove
Screeding is the application of a level layer of material — either traditional sand-cement or fast-drying liquid (flowing) screed — over a concrete floor or insulation to provide a flat, even surface ready for flooring, tiling or underfloor heating.
In Brighton and Hove, that covers Kemp Town, Hove, Preston Park, Hanover, Seven Dials, Fiveways, Patcham, Portslade. Brighton and Hove is known for its Regency architecture, extensive Victorian terraced housing, and later 20th-century development, all within a compact coastal city where many properties are in conservation areas and a significant number are listed.
Coverage
Areas we cover in Brighton and Hove for screeding
Property styles in Brighton and Hove
Regency squares and terraces are concentrated around Brunswick, Kemp Town and the seafront, with dense Victorian terraced housing across much of the wider city, and later suburban housing further from the centre. Basement conversions, loft conversions and rear extensions are common project types on the terraced stock, subject to conservation area and party wall considerations.
Planning considerations
Brighton & Hove City Council is the local planning authority. The city has one of the highest concentrations of conservation areas of any local authority in the South East, and many properties are listed, particularly in the Regency squares. Basement work also requires careful consideration of structural and drainage issues in a dense urban setting.
How it works
Our screeding process
- 01
Substrate preparation
Checking the concrete slab or insulation layer is sound, level and, where relevant, that underfloor heating pipes are correctly laid and pressure-tested.
- 02
Perimeter and levels
Setting perimeter insulation strips and screed depth levels around the room.
- 03
Laying the screed
Pumping (for liquid screed) or hand-laying and levelling (for traditional screed) to the specified depth.
- 04
Drying
Allowing the screed to cure and dry to the point it's ready for flooring or tiling, following the manufacturer's drying guidance for the depth laid.
Also in this area
Other services we provide in Brighton and Hove
Nearby coverage
Screeding in nearby areas
Need help right now?
Before booking a site visit, get an instant answer for £4.99 — Ask an Expert in Brighton and Hove.
FAQs
Screeding in Brighton and Hove: FAQs
Do you provide screeding across all of Brighton and Hove?
Yes, we cover the BN1, BN2 and BN3 postcode areas in full, including Kemp Town, Hove, Preston Park, Hanover, Seven Dials, Fiveways, Patcham, Portslade.
What's the difference between liquid screed and traditional sand-cement screed?
Liquid (flowing) screed is pumped in, self-levels and typically dries faster with good thermal performance, which suits underfloor heating. Traditional sand-cement screed is hand-laid and levelled, and remains a reliable option where a liquid screed isn't practical or needed.
How long before I can walk on a new screed floor?
Most screeds can take light foot traffic within a few days, but this depends on the type and depth laid — we confirm timings for your specific job before laying starts.
Can I extend a listed Regency property in Brighton?
Alterations to listed buildings require listed building consent in addition to any planning permission, and the historic character of Regency terraces means proposals are considered carefully. We assess feasibility on a case-by-case basis.
Get a quote for screeding in Brighton and Hove
Tell us about the property and what you have in mind, and we'll arrange a site visit.
Last reviewed 2026-07-28.