East Sussex · BN1, BN2, BN3
Heat Pumps in Brighton and Hove
Heat pump installation is the fitting of an air-source heat pump and associated hot water cylinder as a replacement for, or alternative to, a gas boiler, sized to the property's heat loss and often eligible for the government's Boiler Upgrade Scheme (BUS) grant.
In Brighton and Hove, that covers Kemp Town, Hove, Preston Park, Hanover, Seven Dials, Fiveways, Patcham, Portslade. Brighton and Hove is known for its Regency architecture, extensive Victorian terraced housing, and later 20th-century development, all within a compact coastal city where many properties are in conservation areas and a significant number are listed.
Coverage
Areas we cover in Brighton and Hove for heat pumps
Property styles in Brighton and Hove
Regency squares and terraces are concentrated around Brunswick, Kemp Town and the seafront, with dense Victorian terraced housing across much of the wider city, and later suburban housing further from the centre. Basement conversions, loft conversions and rear extensions are common project types on the terraced stock, subject to conservation area and party wall considerations.
Planning considerations
Brighton & Hove City Council is the local planning authority. The city has one of the highest concentrations of conservation areas of any local authority in the South East, and many properties are listed, particularly in the Regency squares. Basement work also requires careful consideration of structural and drainage issues in a dense urban setting.
How it works
Our heat pumps process
- 01
Heat loss survey
Assessing the property's insulation, existing emitters and heat demand room by room.
- 02
System design
Sizing the heat pump and cylinder, and specifying any radiator or underfloor heating changes needed to suit lower flow temperatures.
- 03
Installation
Fitting the outdoor unit, cylinder and associated pipework and controls.
- 04
Commissioning and handover
Commissioning the system, testing performance, and explaining the controls.
Also in this area
Other services we provide in Brighton and Hove
Nearby coverage
Heat Pumps in nearby areas
Need help right now?
Before booking a site visit, get an instant answer for £4.99 — Ask an Expert in Brighton and Hove.
FAQs
Heat Pumps in Brighton and Hove: FAQs
Do you provide heat pumps across all of Brighton and Hove?
Yes, we cover the BN1, BN2 and BN3 postcode areas in full, including Kemp Town, Hove, Preston Park, Hanover, Seven Dials, Fiveways, Patcham, Portslade.
Will I need to replace my radiators for a heat pump?
Often, yes — heat pumps run most efficiently at lower flow temperatures than a gas boiler, so existing radiators are sometimes undersized for the new system. We assess this during the heat loss survey and specify any radiator or underfloor heating changes needed.
What is the Boiler Upgrade Scheme (BUS) grant?
It's a government grant offering a fixed contribution toward the cost of installing an air-source or ground-source heat pump in England and Wales. Eligibility depends on the property and installer, so we advise on the likely position but can't guarantee an award.
Can I extend a listed Regency property in Brighton?
Alterations to listed buildings require listed building consent in addition to any planning permission, and the historic character of Regency terraces means proposals are considered carefully. We assess feasibility on a case-by-case basis.
Get a quote for heat pumps in Brighton and Hove
Tell us about the property and what you have in mind, and we'll arrange a site visit.
Last reviewed 2026-07-28.